415.383.4514 Fax: 415.383.9227

Peri Trio

Peri Trio

no images were found

no images were found

Peri Pallets and Transport Containers

One considerable expense for all contractors is freight. Not only is there loading and unloading, moving and storing but increased labor costs and risk for the employees. Peri pallets and transport containers provide sale and cost-effective logistics in all areas.

Slab Props (Multiprop)

In every project there are many different requirements which affects a contractor’s choice in selecting a slab formwork system to utilize. Peri offers slab props made of steel and aluminum which contributes to their low weight, user friendliness, and high bearing capacity

KGF 240 Climbing System

Peri climbing scaffold can be adjusted to suit any building shape. The KGF 240 system provides extremely high levels for safety and flexibility at any height. Crane time is saved when transporting the units

The Peri KGF 240 system, the articulated joints are attached to the brackets via a carriage with rack, RSS push-pull props and AV kicker braces. The formwork can be retracted by approximately 75 cm which provides a safe working environment. The platform is 2.40 m wide.

Peri TRIO Panel Wall Formwork

Due to the rising cost for labor companies are looking to find a quicker and easier forming system. This is where the TRIO systems from PERI can help out. The TRIO works competently on all projects, big or small.

TRIO is an adaptable formwork system that was created to meet and exceed the demands of today’s construction projects to simplify the work and parts required.

Peri Multiprop

Multi Prop post shores are made from aluminum, which gives them a considerable longer service life then steel tubing. It also makes them very light weighing in at 18.8 kg. The MP350 can be extended from 1.95 m to 3.50 m. Multi Props come with a integrated measuring tape which guarantees accurate prop adjustments decreasing measurements time.

Peri Advantage

Low weight Multi Prop post shores are made from aluminum. It also makes them very light weighing in at 18.8 kg.

High load– bearing capacity Capacity can be up to 90Kn

Integrated measuring tape Multi Props come with a integrated measuring tape which guarantees accurate prop adjustments decreasing measurement time.

Self cleaning thread A tie rod can accomplish the required adjustments and self-cleaning to facilitate a fast forming system.

Peri Pallets and Transport Containers

One considerable expense for all contractors is freight. Not only is there loading and unloading, moving and storing but increased labor costs and risk for the employees. Peri pallets and transport containers provide sale and cost-effective logistics in all areas.

Slab Props (Multiprop)

In every project there are many different requirements which affects a contractor’s choice in selecting a slab formwork system to utilize. Peri offers slab props made of steel and aluminum which contributes to their low weight, user friendliness, and high bearing capacity.

Peri Skydeck Aluminum Panel Slab Formwork

Depending upon your slab thickness and strength of the concrete, Peri Skydeck drop head system allows for striking to be accomplished in only one day.

By using a hammer the drop head is released which then causes the formwork to fall 60 mm (panels and main beams). The panels can be sorted quickly from the concrete and immediately re-used for the next phase.

Only one prop is required per slab area of 3.45 m for thickness up to 40 cm, therefore reducing materials requirements. This not only saves time and money but is simplifies the transportation of formwork materials.

Peri Skydeck panels and main beams have self-draining edges, as well as the main beams, are undercut. This insures that cleaning is minimized and decreases shuttering times.

The Skydeck guarantees a straight support line the at end of the formwork.

Easy to clean – The main beam complete with plastic rack lies protected under the panels – cleaning the girder side is not required. Parts have self-draining edges and are powder-coated.

Fewer slab parts – Skydeck’s main beam reduces the number of props. Only 0.30 props per square metre of slab is required. Fewer props save time and leave more space during forming.

KGF 240 Climbing System

Peri climbing scaffold can be adjusted to suit any building shape. The KGF 240 system provides extremely high levels for safety and flexibility at any height. Crane time is saved when transporting the units

The Peri KGF 240 system, the articulated joints are attached to the brackets via a carriage with rack, RSS push-pull props and AV kicker braces. The formwork can be retracted by approximately 75 cm which provides a safe working environment. The platform is 2.40 m wide.

Peri TRIO Panel Wall Formwork

Due to the rising cost for labor companies are looking to find a quicker and easier forming system. This is where the TRIO systems from PERI can help out. The TRIO works competently on all projects, big or small.

TRIO is an adaptable formwork system that was created to meet and exceed the demands of today’s construction projects to simplify the work and parts required.